LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> SRX Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Front Side Door Window Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Window Regulator Clamp
    GM758771Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The window regulator should be at least 1/2 way down before installing the window.

  1. Install the window down into the door.
  2. Position the window into the 2 window regulator guides.
    3. NOTE:

    Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the window for adjustment.

  3. Start the vehicle.
    4. CAUTION:

    Refer to Fastener Caution .

  4. Using the power window switch, raise the window to the fully closed position. Tighten the window regulator guide nuts to 11 N.m (98 lb in).
  5. Install the front side window inner sealing strip. Refer to Front Side Door Window Inner Sealing Strip Replacement .
  6. Inspect the window for proper operation and a tight seal.
  7. Shut off the vehicle.
  8. Install the water deflector.
  9. Install the front side door garnish molding. Refer to Front Side Door Window Garnish Molding Replacement .
  10. Install the front side door trim panel. Refer to Front Side Door Trim Replacement .
scientia non olet · About LEMON Manuals