Liftgate Calibration
NOTE:
To ensure proper calibration of the liftgate, the liftgate assembly must be at room temperature during calibration.
NOTE:
DTC B1019 00 will set automatically as an indicator that the system is in learn mode and not as a fault indicator. Once the travel limits are learned by the liftgate module, the liftgate module will exit calibration mode and DTC B1019 00 become a history code.
Conditions
Use this procedure after replacing, repairing, or disassembling any portion of the power liftgate assembly.
- Connect the scan tool to the vehicle.
- Select Module Diagnosis.
- Select Liftgate Control Module.
- Select Liftgate Maximum Open Position Learn.
- Press "Launch" and follow the on screen instructions.