LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Upper Control Arm Replacement (2500) >> Installation Procedure

Installation Procedure

  1. Install the upper control arm.
    2. Fig 1: Upper Control Arm
    GM793281Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the upper control arm bolts and tighten to 190 (140 lb ft).
  3. Connect the upper control arm to the steering knuckle.
  4. Install the new nut to the upper ball joint stud and tighten to 50 (39 lb ft).
  5. Install the retaining bolts for the brake hose and wheel speed sensor brackets and tighten to 9 (80 lb in).
  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.
  8. Verify the wheel alignment. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals