LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 858 (Sunroof System) >> Repair Instructions >> Sunroof Track Timing/Synchronization (Extended Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the module in the full open position.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement (Regular Cab) or Headlining Trim Panel Replacement (Extended Cab) or Headlining Trim Panel Replacement (Crew Cab) .
  3. Disconnect the electrical connector from the motor/actuator.
  4. Remove the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended Cab)  or Sunroof Motor/Actuator Replacement (Crew Cab) .
  5. Push the window guides rearward on the track until the guides are positioned against the rear hard stop.