Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Energy Absorber Bolts And Spacers

Courtesy of GENERAL MOTORS CORP.

Position the energy absorber to the impact bar.
Install the center spacer and bolt.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the outer spacers and bolts.
Tighten: Tighten the front energy absorber bolts to 5 N.m (44 lb in).
Install the fascia. Refer to Fascia Replacement - Front Bumper .