LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement (4WD) in Front Suspension.
  4. Remove the splash shield (15 series).
    5. Fig 1: Splash Shield (15 Series)
    GM371033Courtesy of GENERAL MOTORS CORP.
  5. Remove the splash shield (25/35 series).
    6. Fig 2: Splash Shield (25/35 Series)
    GM371077Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals