LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb (1) into the socket.
  2. Connect the bulb socket (1) into the center high mounted stop lamp lens.
  3. Install the center high mounted stop lamp lens (2).
    CAUTION: Refer to FASTENER NOTICE .
  4. Install the center high mounted stop lamp lens retaining screws (3).

    Tighten 

    Tighten the center high mounted stop lamp lens screws to 1.5 N.m (13 lb in).

    Fig 1: Installing High Mounted Stop Lamp
    G02422334Courtesy of GENERAL MOTORS CORP.