Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the front side door cable. Ensure the cable is fully seated past the guide tab.
- Slide the front side door inside handle assembly into place (2).
- Install the front side door inside handle fasteners and tighten to 2 N.m (18 lb in).
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
CAUTION:
Refer to Fastener Caution .