Removal Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
- Clean the area around the front axle fill plug and the drain plug.
- Remove the fill plug.
- Remove the drain plug.
- Drain the fluid from the front differential carrier assembly.