LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1583 (Hybrid Engine Electrical System) >> Repair Instructions >> Engine Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ground Strap Nut At Front Of Dash Stud
    GM663474Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the ground strap to the stud.
  2. Install the ground strap nut to the stud at the front of dash and tighten to 9 N.m (80 lb in).
  3. Fig 2: View Of Ground Cable Bolt At Engine Block
    GM663475Courtesy of GENERAL MOTORS CORP.
  4. Position the ground strap and engine wiring harness ground.
  5. Install the engine wiring harness ground bolt and tighten to 16 N.m (12 lb ft).