LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Wiper System & Washer System) >> Repair Instructions >> Windshield Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Solvent Container & Screws
    GM1669972Courtesy of GENERAL MOTORS CORP.
  1. Transfer washer pumps and level indicator to the new washer solvent container (2).
    2. Fig 2: View Of Wheelhouse & Windshield Washer Solvent Container Assembly
    GM1733024Courtesy of GENERAL MOTORS CORP.
  2. Install the windshield washer container assembly (2).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the upper windshield washer solvent container bolts and tighten to 9 N.m (80 lb in).
  4. Install the auxiliary battery tray, if equipped. Refer to Auxiliary Battery Tray Replacement .
  5. Connect the electrical connectors.
    6. Fig 3: Locating Washer Pump Hoses
    GM1733021Courtesy of GENERAL MOTORS CORP.
  6. Connect the washer pump hoses (1, 2). Refer to Windshield Washer Hose Replacement .
  7. Install the lower outer washer container bolt.
  8. Install the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet) or Front Wheelhouse Liner Replacement - Left Side (GMC) .
  9. Install the left front wheel assembly. Refer to Tire and Wheel Removal and Installation .
  10. Fill the washer solvent container with windshield solvent. Refer to Fluid and Lubricant Recommendations (USA and Canada) .
  11. Install the windshield washer solvent cap.
scientia non olet · About LEMON Manuals