LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1194 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement (Non-HP2)

Radiator Replacement (Non-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator (Non-HP2)
GM1698713Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Remove surge tank hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2)  or Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2) .
  3. Remove radiator hose inlet. Refer to Radiator Inlet Hose Replacement (Non-HP2)  or Radiator Inlet Hose Replacement (HP2) .
  4. Remove radiator hose outlet. Refer to Radiator Outlet Hose Replacement (Non-HP2)  or Radiator Outlet Hose Replacement (HP2) .
  5. Remove cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement (Non-HP2)  or Cooling Fan and Shroud Replacement (HP2) .
  6. Remove engine oil cooler pipe/hose quick connect. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
  7. Remove transmission oil cooler lines. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .
1 Radiator Bolt (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  25 N.m (18 lb ft)
2 Radiator Assembly
scientia non olet · About LEMON Manuals