LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray, Brackets & Nuts
    GM1702822Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 3 nuts securing the battery tray to the battery tray bracket.

    Tighten:  Tighten the nuts to 20 N.m (15 lb ft).

  3. Install the nut securing the battery tray to the front fender inner panel.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

    4. Fig 2: View Of Battery Tray Front Support & Bolts
    GM1702819Courtesy of GENERAL MOTORS CORP.
  4. Install the battery tray front support.
  5. Install the battery tray front support bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals