Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Position the mirror face on a angle to the mirror housing.
- Install the mirror face as follows:
- Holding the mirror face, connect the electrical connectors to the back of the mirror.
- Position the mirror face to the motor retainer tabs.
- Position the hand in the center of the mirror face.
- Apply light pressure to the face.
- Push downward and inward to lock in place.
- Inspect the mirror face for proper operation.