Front Drive Axle
- Specifications
- Component Locator
- Diagnostic Information and Procedures
- Symptoms - Front Drive Axle
- Front Drive Axle Noises
- Noisy in Drive
- Noisy When Coasting
- Intermittent Noise
- Constant Noise
- Noisy on Turns
- Front Drive Axle Bearing Wear (Straight)
- Front Drive Axle Bearing Wear (Tapered)
- Four-Wheel Drive Does Not Engage
- Four-Wheel Drive Does Not Disengage
- Front Axle Lubricant Leak Diagnosis
- Repair Instructions
- Front Axle Lubricant Replacement
- Vent Hose Replacement (9.25 inch Axle)
- Front Axle Vent Hose Connector Replacement (9.25 Inch Axle)
- Front Drive Axle Inner Shaft Seal Replacement - Right Side
- Front Drive Axle Inner Shaft Seal Replacement - Left Side
- Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement
- Front Drive Axle Clutch Fork Replacement
- Front Drive Axle Clutch Shaft Bearing Replacement
- Front Drive Axle Inner Shaft Seal and Inner Shaft Bearing Replacement (8.6/ 9.25 Inch Axle)
- Front Drive Axle Actuator Replacement
- Front Differential Drive Pinion Gear Yoke Replacement
- Differential Carrier Bushing Replacement
- Differential Carrier Assembly Replacement (9.25 inch)
- Front Differential Carrier Bracket Replacement
- Front Axle Lubricant Level Inspection (9.25 Inch Axle)
- Front Drive Axle Clutch Fork Inspection
- Inner Axle Shaft Shim Adjustment (8.6 9.25 Inch Axles)
- Differential Carrier Assembly Disassemble (9.25 Inch Axle)
- Front Differential Case Disassemble (9.25 Inch Axle)
- Differential Case Bearings Inspection
- Differential Case and Gears Inspection
- Pinion and Ring Gear Inspection
- Thrust Washers, Shims, and Adjuster Sleeves Inspection
- Front Differential Case Assemble (9.25 Inch Axle)
- Front Differential Drive Pinion Gear Bearing Cup Installation (9.25 Inch Axle w/J 45754)
- Pinion Depth Adjustment (8.6, 9.25 Inch Axle)
- Differential Carrier Assembly Assemble (9.25 Inch Axle)
- Backlash Inspection and Adjustment
- Differential Carrier Assembly Final Assembly (8.25 S4WD and 9.25 Lock Tab)
- Differential Carrier Assembly Final Assembly (8.25 Inch axle Lock Ring Type)
- Gear Tooth Contact Pattern Inspection
- Description and Operation
- Special Tools and Equipment