LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> CTS Base, 2D Coupe, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction (Without LSA) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, with a scan tool command the IPC display test ON and OFF. The Stabilitrak indicator should turn ON and OFF.
    • If the indicator does not turn ON and OFF, replace the IPC.
  2. Observe the scan tool body control module (BCM) Traction Control Switch parameter while pressing and releasing the traction control switch. The reading should change between Active and Inactive.
scientia non olet · About LEMON Manuals