Installation Procedure

NOTE:

During installation ensure that the child tether anchors are installed with the anti-rotation tabs firmly seated in the anti-rotation tab holes on the cross car beam.

Fig 1: Child Tether Anchor & Bolt

GM729861

Courtesy of GENERAL MOTORS COMPANY

Install the child tether anchor to the cross car beam.

CAUTION:

Refer to Fastener Caution .

Install the child tether anchor bolt and tighten to 30 N.m (22 lb ft).
Install the rear shelf trim panel. Refer to Rear Window Panel Trim Replacement (Sedan) , Rear Window Panel Trim Replacement (Coupe) .