LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> CTS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.0L, Or 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement (Coupe, Sedan)

Fuel Pump Flow Control Module Replacement (Coupe, Sedan)

Fig 1: Identifying Fuel Pump Flow Control Module (Coupe, Sedan)
GM2187219Courtesy of GENERAL MOTORS COMPANY
Fuel Pump Flow Control Module Replacement (Coupe, Sedan)

Callout Component Name
Preliminary Procedure 
Partially remove the right side rear compartment trim panel. Refer to Rear Compartment Side Trim Panel Replacement (Sedan) , Rear Compartment Side Trim Panel Replacement (Coupe) .
1 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. Release the two integral retainer tabs and remove the module.
  3. If replacing the fuel pump flow control module, program the control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals