LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> CTS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0895 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the ESC module.
  2. Ignition OFF, test for less than 5 Ω between the ground circuit terminal 47 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify a test lamp illuminates between the B+ circuit terminal 32 and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, replace the ESC module.
scientia non olet · About LEMON Manuals