LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pipe Shield Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cross vehicle brace. Refer to Cross Vehicle Brace Replacement .
  2. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement (LLT) .
  3. Remove the intake manifold insulator.
  4. Remove the wiper transmission. Refer to Windshield Wiper Transmission Replacement .
    5. Fig 1: Intake Manifold & Cylinder Bolts
    GM1977749Courtesy of GENERAL MOTORS COMPANY
  5. Remove the fuel pipe shield to intake manifold bolts (1).
  6. Remove the fuel pipe shield to cylinder bolt (1).
  7. Carefully remove the fuel pipe shield from the vehicle. Take care not to damage the insulation behind the shield.
scientia non olet · About LEMON Manuals