LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement (LLT) .
  2. Remove the high pressure pump shield. Refer to Fuel Pipe Shield Replacement .
  3. Relieve the low side fuel system pressure. Refer to Fuel Pressure Relief (High Pressure Pump) .
  4. Remove the radiator surge tank outlet pipe. Refer to Radiator Surge Tank Outlet Hose/Pipe Replacement .
    5. Fig 1: Identifying Fuel Feed Pipe Components
    GM1977758Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the fuel feed line quick connect fitting from the fuel feed pipe (2). Refer to Metal Collar Quick Connect Fitting Service .
  6. Loosen the fuel feed pipe fitting to the high pressure fuel pump.
  7. Remove the fuel feed pipe bolts (4) from the cylinder heads.
  8. Remove the fuel feed pipe from the engine and high pressure fuel pump. Discard the pipe.
scientia non olet · About LEMON Manuals