LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement (RWD) >> Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: View Of Right Exhaust Manifold Heat Shield
    GM945964Courtesy of GENERAL MOTORS COMPANY
  3. Remove the exhaust manifold heat shield to obtain access.
    4. Fig 2: Locating CKP Electrical Connector
    GM887868Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the crankshaft position (CKP) electrical connector (3).
    5. Fig 3: Identifying Crankshaft Position (CKP) Sensor
    GM1311144Courtesy of GENERAL MOTORS COMPANY
  5. Remove the crankshaft sensor bolt.
  6. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals