LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Sensor and Bracket Replacement (Front) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Ride Sensor
    GM1371680Courtesy of GENERAL MOTORS COMPANY
  1. Position the sensor to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the front ride sensor retaining nut and tighten to 9 N.m (80 lb in).
    3. Fig 2: Locating Front Ride Sensor Link
    GM1371682Courtesy of GENERAL MOTORS COMPANY
  3. Connect the front ride sensor link to the upper control arm ball stud.
  4. Connect the front ride sensor harness connector.
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals