Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the instrument panel (I/P) retainer. Refer to Instrument Panel Retainer Replacement .
- Note the wire harness routing position on the I/P module, to help in assembly.
- Remove the I/P module mounting fasteners.
- Remove the I/P module from the I/P.
WARNING:
WARNING:
A deployed dual stage inflator module will look the same whether one or both stages were used. Always assume a deployed dual stage inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.
WARNING:
Refer to SIR Warning .