LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Side Impact Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of SIS & Mounting Fasteners
    GM751940Courtesy of GENERAL MOTORS COMPANY
  1. Remove any dirt, grease, or other impurities from the mounting surface.
  2. Install the SIS (1) to the center pillar.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the SIS mounting fasteners (2) and tighten to 9 N.m (80 lb in).
    4. Fig 2: View Of SIS CPA, Connector & SIS At Left Center Pillar
    GM751939Courtesy of GENERAL MOTORS COMPANY
  4. Install the harness connector (2) to the SIS (3).
  5. Install the CPA (1) to the SIS harness connector (2).
  6. Install the center pillar trim. Refer to Center Pillar Garnish Molding Replacement .
  7. Move the seat to the original position.
  8. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals