LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to SIR Inflator Module Handling and Storage Warning .

    WARNING:

    Refer to SIR Warning .

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Partially remove the seat back panel to access the wiring.
    3. Fig 1: View of Inflatable Restraint Side Impact Inflator Module & Wiring Harness
    GM513378Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.

  3. Remove the inflatable restraint side impact module (2) from the seat (1). Refer to Driver or Passenger Seat Side Inflatable Restraint Module Replacement .

    With the seat back panel removed, the inflatable restraint side impact module wiring harness (3) will be exposed.

  4. Remove the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
scientia non olet · About LEMON Manuals