LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LLT) >> Installation Procedure

Installation Procedure

  1. Install the generator to the engine.
  2. Install the generator upper bolt.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    4. Fig 1: View Of Generator
    GM887706Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  4. Install the generator lower bolts and tighten to 50 N.m (37 lb ft).
    5. Fig 2: View Of Battery Positive Lead & Generator BAT Terminal Nut
    GM887703Courtesy of GENERAL MOTORS COMPANY
  5. Install the battery positive lead (2) and the generator BAT terminal nut (3) to the generator and tighten to 13 N.m (115 lb in).
  6. Install the BAT terminal boot.
  7. Connect the electrical connector (1) to the generator.
  8. Lower the vehicle.
  9. Install the drive belt to the generator. Refer to Water Pump and Generator Belt Replacement .
  10. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (With Side Post) , Battery Negative Cable Disconnection and Connection (With Top Post) .
scientia non olet · About LEMON Manuals