LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Heat Shield Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Battery Positive & Negative Cables
    GM1296154Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection (With Side Post) , Battery Negative Cable Disconnection and Connection (With Top Post) .
  2. Disconnect the battery positive cable (1) from the battery.
  3. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
    4. Fig 2: View Of Battery Heat Shield Locking Tabs
    GM1296793Courtesy of GENERAL MOTORS COMPANY
  4. Depress the locking tabs (1) on the side of the battery heat shield.
    5. Fig 3: View Of Battery Heat Shield
    GM1296794Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery heat shield from the battery.
scientia non olet · About LEMON Manuals