Removal Procedure

Fig 1: View Of Rear Object Sensor Electrical Connectors

GM489061

Courtesy of GENERAL MOTORS COMPANY

Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement
Disconnect electrical from the rear object sensor.

Fig 2: View Of Rear Object Sensor Assembly

GM500502

Courtesy of GENERAL MOTORS COMPANY

Lift the locking tabs on the housing (4) and remove the rear object sensor (1).

Fig 3: View Of Spring & Housing

GM489063

Courtesy of GENERAL MOTORS COMPANY

Squeeze the spring (1) and remove it from the housing (2).

Fig 4: View Of Rear Object Sensor Housing

GM489064

Courtesy of GENERAL MOTORS COMPANY

Release the tabs on the housing and remove.

Fig 5: Painting Rear Object Sensor Bezel

GM489066

Courtesy of GENERAL MOTORS COMPANY

Remove the rear object sensor bezel by pushing it through the fascia.