LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> SRX 3.0 Y, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L Or 3.0L - Repair Instructions >> Repair Instructions >> Secondary Fuel Tank Module Replacement >> Removal Procedure

Removal Procedure

    WARNING: Refer to Gasoline/Gasoline Vapors Warning .
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Evaporative Emission Line & Fuel Tank Module Electrical Connector
    GM2232930Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1).
  3. Disconnect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Fuel Tank Sender Wrench & Cam Lock Ring
    GM2232738Courtesy of GENERAL MOTORS CORP.
  4. Using the CH 48482:  wrench, remove the cam lock ring (1) by turning counterclockwise.
    5. Fig 3: Identifying Secondary Fuel Pump Module & Crossover Tube
    GM2232798Courtesy of GENERAL MOTORS CORP.
  5. Partially raise the secondary fuel pump module and disconnect the crossover tube (1) by pulling back the plastic retaining tab (2).
    6. Fig 4: View Of Evaporative Emission Line
    GM2232933Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
    7. Fig 5: Identifying Secondary Fuel Tank Module & O-Ring
    GM2232942Courtesy of GENERAL MOTORS CORP.
  7. Remove the secondary fuel tank module (1) and the O-ring (2).
scientia non olet · About LEMON Manuals