LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> SRX 2.8 6 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LAU) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Idler Pulley, Generator & Bolts
    GM2196009Courtesy of GENERAL MOTORS CORP.
  1. Position the generator (4) to the engine.
  2. Loosely install the generator bolts (3).
  3. Install the idler pulley. Refer to Drive Belt Idler Pulley Replacement .
    4. CAUTION: Refer to Fastener Caution .
  4. Tighten the generator bolts (3) in the sequence shown to 58 N.m (43 lb ft).
    5. Fig 2: Engine Harness Electrical Connector, Positive Battery Cable Terminal & Nut
    GM2268938Courtesy of GENERAL MOTORS CORP.
  5. Install the drive belt. Refer to Drive Belt Replacement .
  6. Connect the engine harness electrical connector (1) to the generator.
  7. Install the positive battery cable terminal (4) to the generator.
  8. Install the positive battery cable nut (3) at the generator and tighten to 15 N.m (11 lb ft).
  9. Position the positive battery cable boot at the generator terminal.
  10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals