LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> SRX 2.8 6 >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, inspect the B22 Brake Pedal Position Sensor for correct installation.
    • If loose or incorrect installation is diagnosed, correct the installation of the component.
  2. Ignition ON, perform the Brake Pedal Position Sensor Calibration and verify the DTC does not reset.
    • If the DTC resets, replace the K17 Electronic Brake Control Module (EBCM).
scientia non olet · About LEMON Manuals