Liftgate Angle Sensor Replacement

Fig 1: Identifying Liftgate Angle Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement
1	Liftgate Angle Sensor Procedure Disconnect the electrical connector. Unsnap upper portion of sensor from liftgate and lift upward to release tab.

Callout

Component Name

Preliminary Procedure:
Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement

Liftgate Angle Sensor

Procedure