Liftgate Actuator Control Switch Replacement

Fig 1: Liftgate Close Switch Bezel (Wagon)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the driver door panel trim. Refer to Front Side Door Trim Replacement .
1	Liftgate Actuator Control Switch Procedure Remove the foam insulator to access the switch and bezel. Disconnect the electrical connector. Push in on the integral tabs from the inside of the door trim panel and push the switch out through the bezel.

Callout

Component Name

Preliminary Procedures:
Remove the driver door panel trim. Refer to Front Side Door Trim Replacement .

Liftgate Actuator Control Switch

Procedure

Remove the foam insulator to access the switch and bezel.
Disconnect the electrical connector.
Push in on the integral tabs from the inside of the door trim panel and push the switch out through the bezel.