LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Repair Instructions >> Rear Axle Lower Control Arm Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Lower Control Arm, Retaining Nuts And Bolts
    GM545535Courtesy of GENERAL MOTORS CORP.
  1. Install the lower control arm.
  2. Install the lower control arm retaining bolts.
    3. CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Do not tighten the bolts unless the suspension is at the ride height.

  3. Install the lower control arm retaining nut and tighten:
    • First Pass: 100 N.m (74 lb ft).
    • Final Pass: plus 55 degrees.
  4. Remove the rear axle support.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals