LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (Engine Cooling System) >> Repair Instructions >> Fan Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Camshaft Position Sensor Electrical Connector
    GM1334862Courtesy of GENERAL MOTORS CORP.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel) .
  3. Disconnect the camshaft position (CMP) sensor electrical connector.
    4. Fig 2: View Of Cooling Fan Pulley
    GM1334864Courtesy of GENERAL MOTORS CORP.
  4. Remove the fan pulley bolts/nuts.
  5. Remove the fan pulley.
scientia non olet · About LEMON Manuals