LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Repair Instructions >> Repair Instructions >> Knock Sensor 1 Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Engine Harness Components
    GM1699536Courtesy of GENERAL MOTORS CORP.
  1. Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the engine wiring harness electrical connector (4) from knock sensor.
    3. Fig 2: Left Side Knock Sensor
    GM1402136Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor bolt (739) and knock sensor (718).
scientia non olet · About LEMON Manuals