Rear Object Alarm Control Module Replacement

Fig 1: Rear Object Alarm Module And Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
1	Rear Object Alarm Module Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Rear Object Alarm Module Procedure Position carpet in order to access module. Disconnect electrical connector. Reprogram the rear object alarm module after replacement. Refer to Control Module References

Callout

Component Name

Rear Object Alarm Module Nut (Qty: 3)

CAUTION:

Tighten
2 N.m (18 lb in)

Rear Object Alarm Module

Procedure

Position carpet in order to access module.
Disconnect electrical connector.
Reprogram the rear object alarm module after replacement. Refer to Control Module References