LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> DTS 4.6 S >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Pulley Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Secondary AIR Relay Bracket & Nuts
    GM518257Courtesy of GENERAL MOTORS COMPANY
  1. Remove the secondary AIR relay bracket retaining nuts (2).
  2. Remove the secondary AIR relay bracket (1) from the mounting studs.
    3. Fig 2: View Of Surge Tank, Nuts & Screw
    GM517960Courtesy of GENERAL MOTORS COMPANY
  3. Remove the surge tank retaining nut (2) and bolt (3).
  4. Position and support the surge tank out of the way.
    5. Fig 3: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS COMPANY
  5. Remove the drive belt. Refer to Drive Belt Replacement .
  6. Using J 25034-C  remove the power steering pump pulley.
scientia non olet · About LEMON Manuals