LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> DTS 4.6 S >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Wheel Speed Sensor & Connector
    GM631238Courtesy of GENERAL MOTORS COMPANY
  1. Turn OFF the ignition.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the rear wheel. Refer to Tire and Wheel Removal and Installation .
  4. Remove the wheel speed sensor connector (1) from the wheel speed sensor (2).
    5. NOTE:

    Do not reuse the wheel speed sensor after it has been removed.

  5. Remove and discard the wheel speed sensor (2).
scientia non olet · About LEMON Manuals