LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> DTS 4.6 6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.6L - Repair Instructions >> Repair Instructions >> Fuel Level Sensor Wiring Harness Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Fuel Tank Electrical Harness Connectors
    GM1671759Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel level sensor wiring harness electrical connectors from the pressure sensor and module.
  3. Remove the fuel level sensor wiring harness (1).
scientia non olet · About LEMON Manuals