LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 4.6 A, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.6L (LH2) - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: MAP Sensor, Bracket & Bolt
    GM1234885Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor (3).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bracket (2) and bolt (1) and tighten to 12 N.m (106 lb in).
    3. Fig 2: MAP Sensor Electrical Connector
    GM1234884Courtesy of GENERAL MOTORS CORP.
  3. Connect the MAP sensor electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals