Approximate Fluid Capacities

The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations (USA and Canada) for more information. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.

Application	Capacities
Application	Metric	US English
Cooling System
3.6L V6 Engine	10.8 liters	11.4 quarts
4.6L V8 Engine	11.7 liters	12.4 quarts
Engine Oil with Filter
3.6L V6 Engine	5.7 liters	6.0 quarts
4.6L V8 Engine	7.6 liters	8.0 quarts
Front Axle
Dry Fill	1.2 liters	1.27 quarts
Wet Fill	1.0 liters	1.06 quarts
Rear Axle - Drain and Fill, if differential side cover has been removed to service any internal differential components
For vehicles equipped with Limited Slip Differential	1.2 liters	1.26 quarts
For vehicles not equipped with Limited Slip Differential	1.3 liters	1.37 quarts
Drain and Fill with use of drain plug	1.1 liters	1.16 quarts
NOTE: The following is for vehicles equipped with the Limited Slip Differential option. The Limited Slip Additive container capacity is greater than the amount needed. Only add the amount specified.
Drain and Fill with cover removed	100 ml	3.38 oz
Drain and Fill with use of drain plug	70 ml	2.37 oz
Fuel Tank	66.2 liters	17.5 gallons
Transfer Case	850 ml	0.90 quarts
Transmission
Pan Removal and Filter Removal - Approximate Capacity (6L50)	6.3 liters	6.7 quarts
Complete Overhaul - Approximate Capacity (6L50)	10.6 liters	11.2 quarts
Complete Trans System - Approximate Capacity (6L50)	10.8 liters	11.4 quarts
Brake Fluid Capacities	1.0 liter	1.1 quarts