LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> DTS 4.6 Y >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 4.6L - Repair Instructions - >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Harness Electrical Connectors
    GM1662120Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield, if necessary. Refer to Fuel Injector Sight Shield Replacement .
  2. Disconnect the engine harness electrical connector (4) from the manifold absolute pressure (MAP) sensor.
    3. Fig 2: MAP Sensor
    GM1564200Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAP sensor bracket bolt.
  4. Remove the MAP sensor bracket.
  5. Remove the MAP sensor.
scientia non olet · About LEMON Manuals