LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> DTS 4.6 Y >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 4.6L - Repair Instructions - >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying CMP Sensor Wiring Harness Connector
    GM1672927Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) from the camshaft position (CMP) sensor.
    2. Fig 2: CMP Sensor
    GM1672561Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor bolt.
  3. Remove the CMP sensor.
scientia non olet · About LEMON Manuals