LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 4.6L - Repair Instructions - >> Repair Instructions >> Fuel Feed Rear Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Feed Line
    GM1671760Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel feed rear pipe.
  2. Connect the fuel feed rear pipe quick connect fitting at the module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel feed rear pipe to the retaining feature on the fuel tank.
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals