LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0895 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the ESC module.
  2. Ignition OFF, test for less than 5 ohms between the ground circuit terminal 2 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify a test lamp illuminates between the B+ circuit terminal 1 and ground.
    • If the test lamp did not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, replace the ESC module.
scientia non olet · About LEMON Manuals