Driver Seat Adjuster Memory Module Scan Tool Information
Driver Position Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage Signal | - | Varies | This displays Volts. This is the current battery voltage signal. |
| Current | - | Varies | This displays amps. |
| Driver Seat Front Vertical Sensor | - | Varies | This displays Volts. This is the current front vertical position measured in volts. |
| Driver Seat Horizontal Sensor | - | Varies | This displays Volts. This is the current horizontal position measured in volts. |
| Driver Seat Rear Vertical Sensor | - | Varies | This displays Volts. This is the current rear vertical position measured in volts. |
| Driver Seat Recline Sensor | - | Varies | This displays Volts. This is the current recline position measured in volts. |
| Front Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
| Front Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
| Front Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
| Front Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
| Horizontal Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
| Horizontal Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
| Horizontal Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
| Horizontal Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
| Horizontal Value | - | Varies | This displays Volts. This is the horizontal value stored in memory. |
| Memory 1 Select Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the memory 1 switch. |
| Memory 2 Select Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the memory 2 switch. |
| Rear Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
| Rear Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
| Rear Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
| Rear Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
| Recline Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
| Recline Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
| Recline Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
| Recline Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
| Seat Front Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
| Seat Front Vertical Exit Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical exit position. |
| Seat Horizontal Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
| Seat Horizontal Exit Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal exit position. |
| Seat Rear Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
| Seat Rear Vertical Exit Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical exit position. |
| Seat Recline Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
| Seat Recline Exit Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat recline exit position. |
| Telescope Forward Command | - | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope forward. |
| Telescope Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope forward switch. |
| Telescope Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope rearward switch. |
| Telescope Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope rearward. |
| Tilt Down Command | - | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt down. |
| Tilt Down Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt down switch. |
| Tilt Up Command | - | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt up. |
| Tilt Up Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt up switch. |
Driver Position Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Column Calibration | This output control is used to calibrate the steering column. |
| Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
| Memory 1 Recall | This output control is used to command the driver seat to move into the position stored in memory 1. |
| Memory 2 Recall | This output control is used to command the driver seat to move into the position stored in memory 2. |
| Memory Exit 1 Recall | This output control is used to command the driver seat to move into the position stored in exit memory 1. |
| Memory Exit 2 Recall | This output control is used to command the driver seat to move into the position stored in exit memory 2. |
| Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
| Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
| Seat Forward/Rearward | This output control is used to command the driver seat forward and rearward. |