LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of MAP Sensor Engine Wiring Harness Connector
    GM927850Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the MAP sensor into the intake manifold and tighten to 12 N.m (106 lb in).
  2. Connect the MAP sensor electrical connector.
scientia non olet · About LEMON Manuals