LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Ignition Coil Module Replacement - Right Side >> Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Injector Sight Shield/Top Cover
    GM1272602Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
    2. Fig 2: View Of Engine Wiring Harness & Right Ignition Coil Harness
    GM927822Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the ignition coil assembly electrical connector.
  3. Remove the ignition coil assembly retaining bolts.
  4. Carefully remove the ignition coil assembly.
scientia non olet · About LEMON Manuals